Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires     

Stefan Wessling  Claudia Kuenzer  Winfried Kessels  Manfred W. Wuttke 《International Journal of Coal Geology》2008,74(3-4):175-184

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.  相似文献   

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis   总被引：1，自引：0，他引：1  

Konstadinos N. Moutsopoulos  Alexandra Gemitzi  Vassilios A. Tsihrintzis 《Environmental Geology》2008,54(5):1081-1090

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.  相似文献   

On CO<Subscript>2</Subscript> fluid flow and heat transfer behavior in the subsurface,following leakage from a geologic storage reservoir   总被引：1，自引：0，他引：1  

Karsten Pruess 《Environmental Geology》2008,54(8):1677-1686

Geologic storage of CO₂ is expected to produce plumes of large areal extent, and some leakage may occur along fractures, fault zones, or improperly plugged pre-existing wellbores. A review of physical and chemical processes accompanying leakage suggests a potential for self-enhancement. The numerical simulations presented here confirm this expectation, but reveal self-limiting features as well. It seems unlikely that CO₂ leakage could trigger a high-energy run-away discharge, a so-called “pneumatic eruption,” but present understanding is insufficient to rule out this possibility. The most promising avenue for increasing understanding of CO₂ leakage behavior is the study of natural analogues.  相似文献   

Mineralogy and geochemistry of the Texeo Cu–Co mine site (NW Spain): screening tools for environmental assessment     

J. Loredo  R. Álvarez  A. Ordóñez  T. Bros 《Environmental Geology》2008,55(6):1299-1310

The Cu–Co–Ni Texeo mine has been the most important source of Cu in NW Spain since Roman times and now, approximately 40,000 m³ of wastes from mine and metallurgical operations, containing average concentrations of 9,263 mg kg⁻¹ Cu, 1,100 mg kg⁻¹ As, 549 mg kg⁻¹ Co, and 840 mg kg⁻¹ Ni, remain on-site. Since the cessation of the activity, the abandoned works, facilities and waste piles have been posing a threat to the environment, derived from the release of toxic elements. In order to assess the potential environmental pollution caused by the mining operations, a sequential sampling strategy was undertaken in wastes, soil, surface and groundwater, and sediments. First, screening field tools were used to identify hotspots, before defining formal sampling strategies; so, in the areas where anomalies were detected in a first sampling stage, a second detailed sampling campaign was undertaken. Metal concentrations in the soils are highly above the local background, reaching up to 9,921 mg kg⁻¹ Cu, 1,373 mg kg⁻¹ As, 685 mg kg⁻¹ Co, and 1,040 mg kg⁻¹ Ni, among others. Copper concentrations downstream of the mine works reach values up to 1,869 μg l⁻¹ and 240 mg kg⁻¹ in surface water and stream sediments, respectively. Computer-based risk assessment for the site gives a carcinogenic risk associated with the presence of As in surface waters and soils, and a health risk for long exposures; so, trigger levels of these elements are high enough to warrant further investigation.  相似文献   

Evaluation of approaches to calculate debris-flow parameters for hazard assessment   总被引：2，自引：0，他引：2  

Marcel Hürlimann  Dieter Rickenmann  Vicente Medina  Allen Bateman 《Engineering Geology》2008,102(3-4):152

Many different runout prediction methods can be applied to estimate the mobility of future debris flows during hazard assessment. The present article reviews the empirical, analytical, simple flow routing and numerical techniques. All these techniques were applied to back-calculate a debris flow, which occurred in 1982 at La Guingueta catchment, in the Eastern Pyrenees. A sensitivity analysis of input parameters was carried out, while special attention was paid to the influence of rheological parameters. We used the Voellmy fluid rheology for our analytical and numerical modelling, since this flow resistance law coincided best with field observations. The simulation results indicated that the “basal” friction coefficients rather affect the runout distance, while the “turbulence” terms mainly influence flow velocity. A comparison of the velocity computed on the fan showed that the analytical model calculated values similar to the numerical ones. The values of our rheological parameters calibrated at La Guingueta agree with data back-calculated for other debris flows. Empirical relationships represent another method to estimate total runout distance. The results confirmed that they contain an important uncertainty and they are strictly valid only for the conditions, which were the basis for their development. With regards to the simple flow routing algorithm, this methods could satisfactorily simulate the total area affected by the 1982 debris flow, but it was not able to directly calculate total runout distance and velocity. Finally, a suggestion on how different runout prediction methods can be applied to generate debris-flow hazard maps is presented. Taking into account the definition of hazard and intensity, the best choice would be to divide the resulting hazard maps into two types: “final hazard maps” and “preliminary hazard maps”. Only the use of numerical models provided final hazard maps, because they could incorporate different event magnitudes and they supplied output-values for intensity calculation. In contrast, empirical relationships and flow routing algorithms, or a combination of both, could be applied to create preliminary hazard maps. The present study only focussed on runout prediction methods. Other necessary tasks to complete the hazard assessment can be looked up in the “Guidelines for landslide susceptibility, hazard and risk zoning” included in this Special Issue.  相似文献   

Seismic Hazard Analysis — Quo vadis?     

Jens-Uwe Klügel   《Earth》2008,88(1-2):1-32

The paper is dedicated to the review of methods of seismic hazard analysis currently in use, analyzing the strengths and weaknesses of different approaches. The review is performed from the perspective of a user of the results of seismic hazard analysis for different applications such as the design of critical and general (non-critical) civil infrastructures, technical and financial risk analysis. A set of criteria is developed for and applied to an objective assessment of the capabilities of different analysis methods. It is demonstrated that traditional probabilistic seismic hazard analysis (PSHA) methods have significant deficiencies, thus limiting their practical applications. These deficiencies have their roots in the use of inadequate probabilistic models and insufficient understanding of modern concepts of risk analysis, as have been revealed in some recent large scale studies. These deficiencies result in the lack of ability of a correct treatment of dependencies between physical parameters and finally, in an incorrect treatment of uncertainties. As a consequence, results of PSHA studies have been found to be unrealistic in comparison with empirical information from the real world. The attempt to compensate these problems by a systematic use of expert elicitation has, so far, not resulted in any improvement of the situation. It is also shown that scenario-earthquakes developed by disaggregation from the results of a traditional PSHA may not be conservative with respect to energy conservation and should not be used for the design of critical infrastructures without validation. Because the assessment of technical as well as of financial risks associated with potential damages of earthquakes need a risk analysis, current method is based on a probabilistic approach with its unsolved deficiencies.

Traditional deterministic or scenario-based seismic hazard analysis methods provide a reliable and in general robust design basis for applications such as the design of critical infrastructures, especially with systematic sensitivity analyses based on validated phenomenological models. Deterministic seismic hazard analysis incorporates uncertainties in the safety factors. These factors are derived from experience as well as from expert judgment. Deterministic methods associated with high safety factors may lead to too conservative results, especially if applied for generally short-lived civil structures. Scenarios used in deterministic seismic hazard analysis have a clear physical basis. They are related to seismic sources discovered by geological, geomorphologic, geodetic and seismological investigations or derived from historical references. Scenario-based methods can be expanded for risk analysis applications with an extended data analysis providing the frequency of seismic events. Such an extension provides a better informed risk model that is suitable for risk-informed decision making.  相似文献   

An operational multiscale system for hazards prediction, mapping, and response     

David P. Bacon  Nash’at N. Ahmad  Thomas J. Dunn  Michael C. Monteith  Ananthakrishna Sarma 《Natural Hazards》2008,44(3):317-327

By definition, a crisis is a situation that requires assistance to be managed. Hence, response to a crisis involves the merging of local and non-local emergency response personnel. In this situation, it is critical that each participant: (1) know the roles and responsibilities of each of the other participants; (2) know the capabilities of each of the participants; and (3) have a common basis for action. For many types of natural disasters, this entails having a common operational picture of the unfolding events, including detailed information on the weather, both current and forecasted, that may impact on either the emergency itself or on response activities. The Consequences Assessment Tool Set (CATS) is a comprehensive package of hazard prediction models and casualty and damage assessment tools that provides a linkage between a modeled or observed effect and the attendant consequences for populations, infrastructure, and resources, and, hence, provides the common operational picture for emergency response. The Operational Multiscale Environment model with Grid Adaptivity (OMEGA) is an atmospheric simulation system that links the latest methods in computational fluid dynamics and high-resolution gridding technologies with numerical weather prediction to provide specific weather analysis and forecast capability that can be merged into the geographic information system framework of CATS. This paper documents the problem of emergency response as an end-to-end system and presents the integrated CATS–OMEGA system as a prototype of such a system that has been used successfully in a number of different situations.  相似文献   

Quantitative sinkhole hazard assessment. A case study from the Ebro Valley evaporite alluvial karst (NE Spain)     

Francisco Gutiérrez  Jesús Guerrero  Pedro Lucha 《Natural Hazards》2008,45(2):211-233

Quantitative sinkhole hazard assessments in karst areas allow calculation of the potential sinkhole risk and the performance of cost-benefit analyses. These estimations are of practical interest for planning, engineering, and insurance purposes. The sinkhole hazard assessments should include two components: the probability of occurrence of sinkholes (sinkholes/km² year) and the severity of the sinkholes, which mainly refers to the subsidence mechanisms (progressive passive bending or catastrophic collapse) and the size of the sinkholes at the time of formation; a critical engineering design parameter. This requires the compilation of an exhaustive database on recent sinkholes, including information on the: (1) location, (2) chronology (precise date or age range), (3) size, and (4) subsidence mechanisms and rate. This work presents a hazard assessment from an alluvial evaporite karst area (0.81 km²) located in the periphery of the city of Zaragoza (Ebro River valley, NE Spain). Five sinkholes and four locations with features attributable to karstic subsidence where identified in an initial investigation phase providing a preliminary probability of occurrence of 0.14 sinkholes/km² year (11.34% in annual probability). A trenching program conducted in a subsequent investigation phase allowed us to rule out the four probable sinkholes, reducing the probability of occurrence to 0.079 sinkholes/km² year (6.4% in annual probability). The information on the severity indicates that collapse sinkholes 10–15 m in diameter may occur in the area. A detailed study of the deposits and deformational structures exposed by trenching in one of the sinkholes allowed us to infer a modern collapse sinkhole approximately 12 m in diameter and with a vertical throw of 8 m. This collapse structure is superimposed on a subsidence sinkhole around 80 m across that records at least 1.7 m of synsedimentary subsidence. Trenching, in combination with dating techniques, is proposed as a useful methodology to elucidate the origin of depressions with uncertain diagnosis and to gather practical information with predictive utility about particular sinkholes in alluvial karst settings: precise location, subsidence mechanisms and magnitude, and timing and rate of the subsidence episodes.  相似文献   

CO2地质埋存渗漏风险及补救对策   总被引：7，自引：1，他引：6  

许志刚  陈代钊  曾荣树 《地质论评》2008,54(3):373-386

目前,将CO2埋存于地下深部地质构造（如油气藏、煤层、地下含水层及岩溶盐腔）的减排方案能有效地减缓温室效应而备受关注。无论什么储集体,我们都希望CO2在地下埋存的时间越长越好。然而,对于一项具体工程的实施,必然存在一些客观和主观因素造成CO2渗漏,比如废弃井的不完善或不合理处理、地层断裂系统和水动力系统以及地震所造成的渗漏等等。存在渗漏就可能会对周围人和生态环境造成危害。因此,进行CO2地质埋存的风险评估是相当有必要的,是我们能长期有效安全地进行该项减排方案必不可少的基础和保证。本文即想从建立一套完整的风险评估、管理和监测体系的角度并以加拿大Weyburn油田为例,深入分析CO2地质埋存中可能存在的渗漏风险和途径,建立CO2渗漏风险评估机制,并针对具体的渗漏可能性提出相应的补救对策,为全球范围内,尤其对我国刚刚开展CO2地质埋存研究工作提供一些有益的思路。  相似文献   

Ground motion estimation during the Kashmir earthquake of 8th October 2005   总被引：2，自引：1，他引：1  

S. T. G. Raghukanth 《Natural Hazards》2008,46(1):1-13

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.  相似文献